声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 865|回复: 1

[结构分析] Positive / plus ????

[复制链接]
发表于 2011-4-24 16:06 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
本帖最后由 SANYAN68 于 2011-4-24 16:07 编辑

Offset:
Defines the contact offset. Positive values move the contact closer together (increase penetration/reduce gap) and negative values move the contacts further apart. This setting is displayed only if Interface Treatment is set to Add Offset, Ramped Effects or Add Offset, No Ramping.

Add Offset, Ramped Effects:
Models the true contact gap/penetration plus adds in any user defined offset values. This setting is the closest to the default contact setting used in the Mechanical APDL application except that the loading is ramped. Using this setting will not close gaps. Even a slight gap may cause bodies to fly apart. Should this occur, use a small contact offset to bring the bodies into initial contact. Note that this setting is displayed only for nonlinear contact.
--------------------------------------------------------------------------------------------------------------
Positive
plus
都是翻译成 "正"
差异为何?
回复
分享到:

使用道具 举报

发表于 2011-4-24 16:29 | 显示全部楼层
这个定义就不一样的,positive和negative是表示数值的正负问题,plus一般是指进行一个加法运算
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-18 21:30 , Processed in 0.052022 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表