请教一个LS-DYNA的问题
本帖最后由 wdhd 于 2016-3-24 16:19 编辑/FILNAME,PENETRATION,0
ls-dyna (version 970 ) date 01/10/2005
*** Error line number 2 contains improperly formatted data
***********************************************line# 2
/TITLE,ANALYSIS OF PENETRATION
***********************************************************
*** Error reading 1st control card
E r r o r t e r m i n a t i o n
Memory required for explicit solution : 0
Additional dynamically allocated memory: 0
Total: 0
T i m i n g i n f o r m a t i o n
CPU(seconds) %CPU Clock(seconds) %Clock
----------------------------------------------------------------
Initialization ....... 1.0000E+00 100.00 1.8700E-01 100.00
Element processing ... 0.0000E+00 0.00 0.0000E+00 0.00
Binary databases ..... 0.0000E+00 0.00 0.0000E+00 0.00
ASCII database ....... 0.0000E+00 0.00 0.0000E+00 0.00
Contact algorithm .... 0.0000E+00 0.00 0.0000E+00 0.00
Contact entities ..... 0.0000E+00 0.00 0.0000E+00 0.00
Rigid bodies ......... 0.0000E+00 0.00 0.0000E+00 0.00
Implicit Nonlinear ... 0.0000E+00 0.00 0.0000E+00 0.00
Implicit Lin. Alg. ... 0.0000E+00 0.00 0.0000E+00 0.00
----------------------------------------------------------------
T o t a l s 1.0000E+00 100.00 1.8700E-01 100.00
Problem time = 0.0000E+00
Problem cycle = 0
Total CPU time = 1 seconds ( 0 hours 0 minutes 1 seconds)
CPU time per zone cycle = 0 nanoseconds
Clock time per zone cycle= 0 nanoseconds
Number of CPU's 1
NLQ used/max 96/ 96
Start time 06/08/2006 10:34:41
End time 06/08/2006 10:35:03
Elapsed time 22 seconds ( 0 hours 0 minutes 22 seconds)
E r r o r t e r m i n a t i o n
这是后来MESSAGE里面的，那里出了问题呢
好像是接触定义有了问题
页:
[1]